PTCL ZYXEL P-660R-T1 v2 MODEM SETTINGS

CONFIGURATION  IS FOR "PPPOE/AUTO MODE"

STEP 1: TYPE IN ADDRESS BAR "192.168.1.1" THEN PRESS ENTER BUTTON.

PASSWORD IS "1234" AND PRESS "Login".

STEP 2: NOW CLICK ON "IGNORE".

STEP 3: NOW CLICK ON "Go to Advance setup" AND CLICK ON "APPLY".

STEP 4: NOW IT SHOWS MODEM STAUTS.

STEP 5: THEN LEFT SIDE OF THE SCREEN CLICK ON "NETWORK" THEN CLICK ON "WAN", FILL OUT THE REQUIRED FIELDS AS DETAILS ARE PROVIDED TO YOUR ISP PROVIDER.

NOTE: FOR COPPER USERS "VPI=0" AND "VCI=103" AND FOR FIBER OPTIC USERS "VPI=8" AND "VCI=81".

STEP 6: NOW LEFT SIDE OF THE SCREEN CLICK ON "NETWORK" THEN CLICK ON "NAT", CHECK MARK ON "Active Network Address Translation (NAT)", AND VALUE OF "Max NAT/firewall Session Per User" FROM "512" TO "250" AND CLICK ON "APPLY" BUTTON.

STEP 7: CLICK ON "MAINTENANCE" THEN CLICK ON "TOOLS" THEN CLICK ON "RESTART" TAB AND CLICK ON "RESTART" BUTTON.

SETTINGS FOR "BRIDGE MODE/DIALER MODE"

 STEP 1: TYPE IN ADDRESS BAR "192.168.1.1" THEN PRESS ENTER BUTTON.

PASSWORD IS "1234" AND PRESS "Login".

STEP 2: NOW CLICK ON "IGNORE".

STEP 3: NOW CLICK ON "Go to Advance setup" AND CLICK ON "APPLY".

STEP 4: NOW IT SHOWS MODEM STAUTS.

STEP 5: THEN LEFT SIDE OF THE SCREEN CLICK ON "NETWORK" THEN CLICK ON "WAN", FILL OUT THE REQUIRED FIELDS AS DETAILS ARE PROVIDED TO YOUR ISP PROVIDER AND MODE MUST BE "BRIDGE".

NOTE: FOR COPPER USERS "VPI=0" AND "VCI=103" AND FOR FIBER OPTIC USERS "VPI=8" AND "VCI=81".

HOW TO CHANGE LAN IP ADDRESSES

CLICK ON NETWORK THEN CLICK ON "LAN" CHANGE IP ADDRESS AS REQUIRED eg: "10.10.10.1" AND CLICK ON "APPLY" BUTTON.

HOW TO CHECK YOUR LINE PARAMETERS

CLICK ON "MAINTENANCE" THEN CLICK ON "DIAGNOSTIC" AND CLICK ON TAB "DSL line" AND THEN CLICK ON "DSL line status" BUTTON IT SHOWS YOUR ACTUAL LINE PARAMTERS.

ZYXEL WIRELESS CONFIGURATION

CLICK ON "NETWORK" ON THE LEFT SIDE OF THE SCREEN THEN CLICK ON "WIRELESS LAN".

NOTE: "ACTIVE WIRELESS LAN" MUST BE CHECK.

COMMENT US FOR FURTHER HELP.