PTCL ZXDSL 831 series ADSL MODEM SETTINGS

CONFIGURATION  IS FOR "PPPOE/AUTO MODE"

STEP 1: TYPE IN ADDRESS BAR "192.168.1.1" THEN PRESS ENTER BUTTON.

USER NAME IS "admin" PASSWORD IS ALSO "admin" AND PRESS "log in".

NOTE: USERNAME AND PASSWORD MUST BE IN SMALL LETTERS.

STEP 2: CLICK ON "QUICK START".

STEP 3: THEN CLICK ON "QUICK SETUP" ON THE LEFT SIDE OF THE SCREEN. NOW IT IS ASKING FOR "VPI AND VCI" VALUES PROVIDE RESPECTIVELY AND CLECK ON "NEXT" BUTTON.

NOTE: FOR COPPER USERS "VPI=0" AND "VCI=103" AND FOR FIBER OPTIC USERS "VPI=8" AND "VCI=81".

 

STEP 4: SELECT 2ND OPTION THAT IS "PPP OVER ETHERNET (PPP0E)" THEN CLICK ON "NEXT" BUTTON.

STEP 5: NOW CLICK ON "OBTAIN AN IP ADDRESS AUTOMATICALLY" AND CHECK ON  "ENABLE NAT".

STEP 6: NOW IT IS ASKING FOR "USERNAME AND PASSWORD" WHICH IS PROVIDED BY YOUR ISP PROVIDER AFTER ENTERING CLICK ON "NEXT" BUTTON.

STEP 7: JUST CHECK ON "ENABLE DHCP SERVER ON THE LAN" THEN CLICK ON "NEXT" BUTTON.

STEP 8: NOW CLICK ON "APPLY" BUTTON TO FINISH THE ROUTER SETTINGS.

AFTER CLICKING ON APPLY BUTTON DSL ROUTER IS START REBOOTING SO, WAIT FOR 2 MINUTES.

SETTINGS FOR "BRIDGE MODE/DIALER MODE"

STEP 1: TYPE IN ADDRESS BAR "192.168.1.1" THEN PRESS ENTER BUTTON.

USER NAME IS "admin" PASSWORD IS ALSO "admin" AND PRESS "log in".

NOTE: USERNAME AND PASSWORD MUST BE IN SMALL LETTERS.

STEP 2: CLICK ON "QUICK START".

STEP 3: THEN CLICK ON "QUICK SETUP" ON THE LEFT SIDE OF THE SCREEN. NOW IT IS ASKING FOR "VPI AND VCI" VALUES PROVIDE RESPECTIVELY AND CLECK ON "NEXT" BUTTON.

NOTE: FOR COPPER USERS "VPI=0" AND "VCI=103" AND FOR FIBER OPTIC USERS "VPI=8" AND "VCI=81".

STEP 4: SELECT 5TH OPTION THAT IS "BRIDGING" THEN CLICK ON "NEXT" BUTTON.

STEP 5: NOW CLICK ON "APPLY" BUTTON TO FINISH THE ROUTER SETTINGS.

AFTER CLICKING ON APPLY BUTTON DSL ROUTER IS START REBOOTING SO, WAIT FOR 2 MINUTES.

MODULATION SETTINGS

AFTER ENTERING INTO CONSOLE PAGE FIRST CLICK ON "ADVANCE" THEN CLICK ON "WAN" THEN CLICK ON "ADSL" AS SHOWN IN THE PICTURE BELOW AND SELECT "G.dmt" AND "ADSL2+" FOR THIS MODEM TO GET WORK EFFICIENT AND CLICK ON "SAVE" BUTTON MODULATION SETTINGS DONE.

HOW TO CHECK YOUR LINE PARAMETERS

AFTER ENTERING INTO CONSOLE PAGE CLICK ON "STATUS" ON THE TOP OF THE SCREEN THEN CLICK ON "ADSL LINE" ON THE LEFT SIDE OF THE SCREEN.

COMMENT US FOR FURTHER HELP.