PTCL ZXDSL 831CII (WHITE FOUR PORTS) ADSL Modem Settings

ZXDSL 831CII "PPPOE/AUTO MODE" CONFIGURATION

STEP 1: 
Type "192.168.1.1" in address bar to open console page.
Username is "admin", password is also "admin" and press "log in".

 

NOTE: USERNAME AND PASSWORD SHOULD BE IN SMALL LETTERS.

 

STEP 2:
Click "QUICK START" from the left and "NEXT".
 

STEP 3:
Choose Third option "PPPOE/PPPOA" and then "NEXT".

STEP 4:
Enter you credentials provided by your Service provider and click "NEXT".

NOTE: FOR COPPER USERS "VPI=0" AND "VCI=103" AND FOR FIBER OPTIC USERS "VPI=8" AND "VCI=81".

STEP 5:
You have completed the configurations.
Click "COMPLETE" to finish.
 

SETTINGS FOR "BRIDGE MODE/DIALER MODE"

STEP 1: 
TYPE IN ADDRESS BAR "192.168.1.1" THEN PRESS ENTER BUTTON.

USER NAME IS "admin" PASSWORD IS ALSO "admin" AND PRESS "log in".

NOTE: USERNAME AND PASSWORD MUST BE IN SMALL LETTERS.

STEP 2:
CLICK ON "QUICK START" AND THEN CLICK ON "NEXT" BUTTON.

STEP 3:
SELECT 4TH OPTION THAT IS "BRIDGE MODE" THEN CLICK ON "NEXT" BUTTON.

STEP 4:
NOW IT IS ASKING FOR "VPI, VCI" VALUES AFTER PROVIDING ACCORDING TO YOUR LINE THEN CLICK ON "NEXT" BUTTON.

NOTE: FOR COPPER USERS "VPI=0" AND "VCI=103" AND FOR FIBER OPTIC USERS "VPI=8" AND "VCI=81".

STEP 5:
ROUTER CONFIGURATION IS SUCCESSFULLY COMPLETED SO, CLICK ON "COMPLETE" BUTTON TO FINISH THE SETTINGS.


 

MODULATION SETTINGS

AFTER ENTERING INTO CONSOLE PAGE FIRST CLICK ON "ADVANCE" THEN CLICK ON "ADSL" AS SHOWN IN THE PICTURE BELOW AND SELECT "ADSL2+" FOR THIS MODEM TO GET WORK EFFICIENT AND CLICK ON "SAVE" BUTTON MODULATION SETTINGS DONE.

NOTE: AFTER CLICKING ON SAVE MODEM UNSYNC ITSELF AND TRYING TO SYNC AGAIN SO WAIT FOR 2 MINUTES APPROX.

HOW TO CHECK YOUR LINE PARAMETERS

After opening console page. To check line parameters click "ADSL STATUS" from left pane.
 

HOW TO CHECK YOUR WAN STATUS

After opening console page. To check line parameters click "WAN STATUS" from left pane.
 

COMMENT US FOR FURTHER HELP.