On April 13, 2014 by Admin in Software
*Download image file(.iso) and burn on blank CD.
Step by Step guide to crack Wi-Fi password
Step by Step guide to crack Wi-Fi password
STEP 1:
Insert CD to you CD Rom, restart your computer and Boot the CD Rom (just like when you format computer to
install windows, boot the CD).You may need to change your boot order to CDROM first
instead of Hard disk. It normally change in BIOS setup during you start
computer by press F2, F10, ESC depending your computer.
** If you don't know how to do this, kindly consult your friend/computer technician with basic computer knowledge.
OR
Go to www.google.com and
search for how to "Boot from CD ROM drive".
STEP 2:
After boot successful, you will be bring to below screen. Click the
"Inflator" to start the program.Windows will prompt out, just click YES.
STEP 3:
At below screen, select the Wi-Fi card and wait for
the monitoring mode enable. Then click "Next".
STEP 4:
Click Scan and wait for 30second. Then select the Wi-Fi
that have client as shown in below.
Click and highlight the client info and click "Next".
Click and highlight the client info and click "Next".
STEP 5:
Click start to attack, you will notice the IVS start
running... Once it reaches 30000 to 50000, the password should be found. Refer
below picture.
Note: the router that you want
to hack must be using (have data transfer), the higher data transfer, the
faster the cracking process.
If you notice that IVS value is not running, or running very very slow after few minutes, it means that there is no data transfer on the router. You may look for other time (when the router is using) to test again.
Below shown successful case with password shown. Copy down the password and close the software. Then logout and shutdown the machine.
If you notice that IVS value is not running, or running very very slow after few minutes, it means that there is no data transfer on the router. You may look for other time (when the router is using) to test again.
Below shown successful case with password shown. Copy down the password and close the software. Then logout and shutdown the machine.
*** This Beini Software is for your own wifi education purpose.
Cracking other people Wi-Fi is illegal and against law.
We advise you do not attempt to attack other people wireless other than your own.
Cracking other people Wi-Fi is illegal and against law.
We advise you do not attempt to attack other people wireless other than your own.
Don't forget to share your experience with us.
Click here to register yourself on Personal Cloud and get 20GB space FREE. For More information Click Here
Search
Popular Posts
-
HOW TO CONNECT PTCL MODEM WITH TP-LINK WIRELESS ROUTER STEP 1: Your TP-Link should be connected with the computer/Laptop through ...
-
ZXDSL 831CII "PPPOE/AUTO MODE" CONFIGURATION STEP 1: Type "192.168.1.1" in address bar to open console ...
-
HOW TO INSTALL AND CONFIGURE PTCL WIRELESS DONGLE Step 1: Insert Driver CD into CD-Drive and launch PTCL.exe Step 2: Accep...
Contact Form
Powered by Blogger.